Liquid Silicone Rubber Material EOZZ

Product Details:

  • Place of Origin: Guangdong, China
  • Brand Name: Vinisili
  • Part Number: VNSL-LSRM-EOZZ
  • Minimum Order Quantity: 1000 Kilogram/Kilograms
  • Lead Time:
    • For Quantities between 1 and 10,000 Kilograms: 5 days (Negotiable)
    • For Quantities over 10,000 Kilograms: Please contact us for lead time details
  • Shipping Support: Sea shipment; Air shipment
  • Payment Options: This supplier accepts L/C (Letter of Credit) and T/T (Telegraphic Transfer) payments
  • Packaging: 20KG/200KG Bucket + Pallet

For additional information or to discuss specific lead times for orders exceeding 10,000 kilograms, please feel free to contact us. We are committed to providing high-quality products and flexible ordering options to meet your specific requirements.


This series product is two-component addition liquid silicone rubber, which has excellent high and low temperature resistance, excellent weather resistance.

It adopts to the liquid injection molding process technology and can be widely used in kitchenware, industrial seals, silicone gasket, adult products and other


Application: kitchenware, industrial seals, silicone gasket, adult products and other

Appearance: Translucent.Liquid.

Product name: Liquid Silicone Rubber.

Hardness Shore A: 20-70.

Features: High strength, Excellent weather resistance, Aging resistance, Rapid prototyping, good flowability.

Shelf life: 12 Months.

HS code: 3910000000.

Viscosity: Favorable.

Product Presentation

This product doesn’t use substances prohibited by ROHS instructions, and hazardous substances shall be implemented according to ROHS instructions. The third party certification reports such as ROHS, REACH and FDA will be updated every year.

Travel Release Of Liability

The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure our products are safe, effective, and fully satisfactory for its intended end use. Suggestions of use shall not be taken as inducements to infringe any patents.

Vinisili’s sole warranty is that our products will meet the sales specifications in effect at the time of shipment.

Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.

To the fullest extent permitted by applicable law, Vinisili specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability.

Vinisili disclaims liability for any incidental or consequential damages.

Product Features

High strength

Excellent weather resistance

Aging resistance

Rapid prototyping

How To Use

1. Suggest that the consumer use the liquid injection molding machine to inject into the mold and manufacture products.

2. The two components of A and B must be completely mixed by machine according to the weight or volume ratio of 1:1. The vulcanization time is determined by the molding temperature. At high temperature conditions, a short time is required for product forming. If the silicone product is thick and large, it takes longer time to mold. After vulcanization, the mold can be disassembled.

3. If the machine is shut down for a long time (more than two days), either inject component A or component B into the mixing section alone. Or remove the static mixer of the injection molding machine immediately, seal and store it in a low temperature (< 1℃) environment, or clean up the remaining rubber.

Packaging, Storage and Caution

1. This series of product is packed in 20 kg/plastic straight pail or 200 kg/metal drum, with plastic liners.

2. Products should be stored in sealed condition, kept it in a cool place and avoid rain and sun exposure.

3. This series of products are non-dangerous goods. The valid period is 1 year. If the products exceed the storage life, it can be re-tested to prove the curing speed is acceptable, if so, it can be used.

4.To prevent cure inhibition, try to avoid contact with tin compound (most condensation silicone contain tin compound catalyst) amines, sulfur and phosphorus compounds and some metal salts.

5. In this series, component A contains catalyst and component B contains cross-linking agent. When products from different manufacturers are used, tests shall be carried out to avoid cross-linking reaction.

Proportion 1:01 1:01 1:01 1:01 1:01 1:01
Appearance Translucent Translucent Translucent Translucent Translucent Translucent
Viscosity/mPa.s 30×10 4 50×10 4 80×10 4 90×10 4 100×10 4 120×10 4
Hardness/Shore A 18-22 28-32 38-42 48-52 58-62 66-72
Tensile Strength/MPa ≧4.0 ≧5.0 ≧6.0 ≧7.0 ≧7.5 ≧7.0
Elongation/% ≧450 ≧400 ≧400 ≧400 ≧260 ≧150
Tear Strength/kN/m ≧6 ≧10 ≧12 ≧15 ≧20 ≧15
 Specific Gravity/g/cm3 1.1 1.1 1.11 1.12 1.13 1.14
Scroll to Top
Get Quote